In The News
Process Engineering - Unlock data from Zone 2 Hazardous areas (8th February 2011)
Extronics has launched the iWAP201A, a wireless access point that is certified by Atex for use in Zone 2 and 21 hazardous areas. The 802.11 a/b/g wireless access point has a 316L stainless steel enclosure to facilitate deployment in potentially explosive, Read more.....
Connecting industry - Electrical Engineering
-
Back-up power for Zone 1 (19 March 2010)
Extronics has introduced a new UPS system for use in Zone 1
hazardous areas. The iUPS100 provides 230V AC back-up power for up
to 60 minutes, at 1,000W full load.
read more...
HazardEx -
Technical Innovation of the Year (02 March 2010)
This award category is sponsored by R.Stahl, and the winners for
Technical Innovation of the Year are:
read more...
Fire & Safety Group - Image Code Reader
for Zone 1 & 21 Hazardous Areas (25 February 2010)
Extronics has launched the iSCAN300 Zone 1 image code reader. read
more...
Design Products & Applications - 1D
and 2D barcode scanning in hazardous areas (17 February
2010)
Extronics has introduced the iSCAN300 Zone 1 image code reader.
Certified ATEX II 2 G EEx d IIC T5 or T6 & II 2 D IP66 T85°C or
T100°C, the unit brings the benefits of efficient manufacturing
data control to Zone 1 and Zone 2 hazardous areas where it was
previously unavailable. read
more...
Connecting Industry - Electrical
Engineering -
Getting started (11 January 2010)
Extronics has launched its iSTART100 DoL Motor Starter certified
for use in Zone 1 or 21 hazardous areas.
read more...
Fire & Safety Group - Supplying Power to
Critical Equipment in Hazardous Areas (30 December
2009)
Extronics, supplier and manufacturer of intrinsically safe and
explosion-proof electrical and electronic equipment, has launched
the iUPS100 Zone 1 uninterruptible power supply system. read
more...
Design Products & Applications - UPS
for Zone 1 hazardous areas supports 1,000W/230Vac loads for 60
minutes (17 December 2009)
Extronics has introduced its iUPS100 uninterruptible power supply
system, which is certified for use in Zone 1 hazardous areas where
it can provide 230Vac back up power for up to 60 minutes, at 1,000W
full load. read
more...
HazardEx -
Intrinsically safe camera complete with flash and voice annotation
function (23 November 2009)
Extronics has launched the 3.1 mega pixel iCAM501 intrinsically
safe camera with 4 LED Flash, which is ATEX and IECEx certified.
Manufactured from rugged injection moulded anti static plastic the
iCAM501 is IP65 rated.
read more...
Petro Industry News -
New Zone 1 Gas Detector for the Measurement of Inline Gas
Applications Without Sampling Systems (23 October
2009)
Extronics (UK) has launched the iLEL100 Probe to monitor the
flammability (Lower Explosive Limit, %LEL) of a gas or solvent
vapour by direct insertion into a process or extraction exhaust
duct or alternatively to monitor for a range of Toxic Gases.
read more...
Fire & Safety Group -
Direct Insertion probe (30 September 2009)
The iLEL100 is a solvent monitor, which has been designed to
measure the flammability (Lower Explosive Limit, %LEL) of a gas or
solvent vapour by direct insertion into a process or extraction
exhaust duct.
read more...
Petro Industry News -
New Zone 1 Gas Detector for the Measurement of Inline Gas
Applications Without Sampling Systems (23 September
2009)
Extronics (UK) has launched the iLEL100 Probe to monitor the
flammability (Lower Explosive Limit, %LEL) of a gas or solvent
vapour by direct insertion into a process or extraction exhaust
duct or alternatively to monitor for a range of Toxic Gases.
read more...
HazardEx -
Intrinsically safe camera complete with flash and voice annotation
function (18 September 2009)
Extronics has launched the 3.1 mega pixel iCAM501 intrinsically
safe camera with 4 LED Flash, which is ATEX and IECEx certified .
read more...
Design Products & Applications - Power
supply back-up for Zone 2 hazardous area applications (04
September 2009)
Extronics has launched the iUPS200 Zone 2 uninterruptible power
supply system. The iUPS200 is certified for use in Zone 2
hazardous areas and provides back up power for up to 85 minutes, at
75W full load. read
more...
HazardEx -
Supplying power to critical equipment in Zone 2 (02
September 2009)
Extronics has launched the iUPS200 Zone 2 uninterruptible power
supply system. The system is certified for use in Zone 2 hazardous
areas and provides back up power for up to 85 minutes, at 75W full
load. Critical equipment is protected in the event of a blackout or
brownout.
read more...
Design Products & Applications - DOL
motor starter is certified for Zone 1/21 hazardous areas (01
September 2009)
Extronics, a supplier and manufacturer of intrinsically safe and
explosion-proof electrical and electronic equipment, has introduced
the iSTART100 direct-on-line (DOL) motor starter, which is
certified for use in Zone 1/21 hazardous areas. read
more...
HazardEx -
Short lead times means you get started quicker (28 August
2009)
Extronics has launched the iSTART100 DoL motor starter. Certified
for use in Zone 1/ 21 hazardous areas the Extronics iSTART100 is
designed for applications requiring DoL (Direct on Line) starting
of motors as well as being suitable for a wide range of industrial
equipment.
read more...
Process Engineering -
Coatings firm probes solvent vapour measuring device (4
August 2009)
Raleigh Coatings has trialled a new type of solvent vapour probe at
its Staffordshire operation, which provides contract coating
services to industry markets including medical devices, aerospace,
security and electronics.
read more...
HazardEx -
Probe provides long term maintenance free operation (04
August 2009)
Extronics has the iLEL100 Solvent Monitor probe which virtually
eliminates maintenance. The iLEL100 Solvent Monitor was conceived
and designed as an in situ solution for the continuous measurement
of flammability of solvent vapours driven off in ovens and dryers
within the coating/converting industries.
read more...
HazardEx -
International hazardous area news available on line (19
May 2009)
The latest Hazardous Area International has been published and is
available electronically. The issue brings you the latest news for
hazardous areas around the World and previews two important
European process industry exhibition events.
read more...
HazardEx -
Zone 1 gas detector for inline gas applications (27 April
2009)
Extronics has launched the iLEL100 Probe to monitor the
flammability of a gas or solvent vapour by insertion into a process
or extraction exhaust duct or alternatively to monitor for a range
of Toxic Gases. The probe has been designed to reduce installation
and commissioning costs as well as substantial maintenance costs.
read more...
Connecting Industry -
Zone 1 plug and play / portable luminaire (26 November
2008)
Extronics has launched the iLITE300 zone 1 and 21 plug and
play/portable linkable luminaire for gas and dust environments. It
is certified to ATEX and IEC Ex requirements.
read more...
